Top 10 STL Files For 3D Printing (23/04/24)

I have started to create a list of the best STL files I find and thought it would be cool to upload it to the website. This is obviously subjective and you might not agree with them all but hopefully you will find a gem amongst them. In no particular order..

1. NEURAL NETWORK ON YOUR WALL STL

This decorative composition consists of 16 unique elements that easily attach to the wall using reusable adhesive pads. Assemble an impressive installation on your wall that mimics the structure of a neural network and add a scientific chic to your space. Before purchasing, make sure that your 3D printer can provide the necessary print quality to achieve the best result. Create your own unique decoration that will become the centerpiece of your interior!

3D PRINTING SETTINGS

PLA filament No support No infill Perimeter line 2 – 3 depends on the printer and cooling Nozzle 0.4 Layer height 0.1 – 0.15 depends on the printer and cooling The printer’s build plate should be at least 270mm x 270mm. If your surface is smaller, you can use the scale modifier, as well as cut the models in your slicer Link to STL File

2. Batman Bust(Fan Art)

Batman Bust was inspired by the one from the animated series. Consists of two parts, a bust and a stand.

Link to STL File

3. Floating rock display Planter V2

Recommended to print with a lot of supports and 0.1 nozzle if you want the top engravings to look nice 🙂 (from community feedback I haven’t printed it yet to be clear)

V2 Changes:

Thicker rings and links on the chain Replaced the top flat base with one of my old Norse sculpt Aligned the floating rock in the center moved the feet/ bases a bit closer to the center Added a multi-color version 🙂 some light topology clean Link to STL File

4. Fallout light sign STL

Hello all, here is another fusion project. I have watched the show and liked it so I have decided to make a light sign. You can also print mushrooms or not. There is a picture where you can see all the wiring. Just use the cheapest USB LED strip and a few LEDs red or yellow for the mushroom.

Print Settings

Printer Brand: Anycubic Printer: Kobra Rafts: No Supports: Yes Resolution: 0,3 Infill: 15 Filament Brand: whatever Filament color: black and white Filament material: whatever Link to STL File [mailerlite_form form_id=1]

5. MULTIFUNCTION BLOCKER STL

Here’s a handy multi-functional blocker.

You can hang your brooms or shovels or anything else you like on it. It can also be used as a doorstop to avoid damaging walls, and as a doorstop if you have a door that closes by itself. In the files, you’ll find a base with holes for screws and a base without holes for those who want to use double-sided tape. I’ve made two dimensions for the flexible TPU print part one that will accept diameters from 18mm to 22mm and one for diameters from 23mm to 28mm.

3D PRINTING SETTINGS

The base part can be printed in PLA without 15% filler support The fixing part must be printed in TPU without support filling 15%. You’ll need to print 2 counters Link to STL File

6. WAR CRY INCENSE HOLDER

War Cry Incense Holder If throwing a spear means the beginning of a war, throwing an incense must be a cry for peace! This STL file is recommended for FDM Printers! 3D Printing Time Based on Ender 3: 01 Day 07 Hour 52 Minutes (will vary accord to you printer model) Approximately Height: 18 cm Link to STL File

7. Fallout-Inspired Vault Key Fob Assortment – Print in place

Assortment of numbered Vault Keys inspired by the Fallout TV show. These are easy to print and if you don’t have an AMS you can do a simple filament swap to achieve the same effect. Numbers included: 13, 76, 101, 111, 777, 666, 420, 69, 33 Link to STL File

8. Monopoly – Modular 3D Print

Monopoly Modular Make Settings Note: Excluding Dice and Pawns Material PLA or PETG Infill %20 Wall 2 Note: Pawns and Dice Material PLA or PETG Infill %80 Wall 2 22 Board Deed 3 Board Luck 1 Board Parking 1 Board Go To Jail 1 Board Just Visiting 1 Board Electric Company 1 Board Water Works 1 Board Telephone Company 1 Board Internet Sevice Provider Company 2 Board Pay Tax 1 Board Go and Salary 1 Board Casino (Roll 2,3,4,10,11,12 To WIN) (Roll 5,6,7,8,9 To Loss) 4 Board Station (Transfer to another area for a fee) (Not necessarily.) 40 Total 30 Extention Home Part 2 Other Dice 30 Pawn Home 20 Pawn Hotel 10 Pawn Mansion 5 Pawn Mansion Roof 4 Pawn People

Print Settings

• Printer brand:Creality
• Printer:Ender-3 S1
• Rafts: Doesn’t Matter
• Supports: Doesn’t Matter
• Infill: 20
• Filament brand:Porima
• Filament material:PLA or PETG
• Make the rolls and dice at 80% full.

Link to STL File

9. Rocket with Boosters (2 sizes)

These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the ‘boosters’. I’ve included the following STL models: Large Rocket (complete) Large Rocket (body only) Large Rocket Booster Insert (a set of 4) Small Rocket (complete) Small Rocket (body only) Small Rocket Booster Insert 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Dimensions of Large Rocket: 4in x 2 3/8in Dimensions of Small Rocket: 3 1/4in x 1 7/8in *Supports are needed for the larger rocket at the base around the outside rings of the boosters. (Make sure not to include supports inside the booster chambers because you need to keep those clear to drop the boosters in when you pause the print:) There are two ways you can print these rockets:

1. Print the complete rocket
2. For different color rockets and boosters, print the boosters first, print the rocket second pausing at layer height.

Link to STL File

10. Desktop Skee-Ball

Desktop Skee-Ball is not only a super fun desktop game, It’s the best way to procrastinate. This is the most fun desktop game I’ve made so far, and it’s definitely the coolest looking as well. It’s also very aesthetic and can be printed in colors to match your desk setup. These make great gifts but can also be sold for a profit! Components you’ll need to order. All of these should be on Amazon Prime. These are the exact same components as desktop golf. 1. The Balls: 1/4″ Steel Ball Bearings (Amazon) 2. The Magnets: 5×3 mm Small Round Magnets (Amazon) 3. The Tube: 3/8″ ID, 1/2″ OD PVC Clear Vinyl Tubing (Amazon) –Assembly Instructions– Everything goes together in an intuitive way. However, here are some instructions on assembly. Machine

• Snap the Bottom Cover onto the Machine Base
• Snap Hole Board into Machine Base
• Snap-Top Cover onto the Machine Base
• Insert Clamps into the sides of the Machines
• Screw screws into clamps and secure to the desk
• Insert the tube into hole on Bottom Cover

Launcher

• Install the 2 magnets into the slots as shown below
• Insert the screw into Launcher, tighten onto the desk
• Place the Hex Piece into the tee box hex hole
• Click the Spring onto the hex
• Insert the Release lever into the hole underneath the Launcher
• Cut the Tube to length (some sag is fine) and insert it into the tube hole. Start with the tube longer than needed and test to see if the ball has the correct speed. Cut tube shorter if more speed is needed

Link to STL File

Final Words.

So there we have it, this week’s top 10 3D print files according to me. With the Fallout TV series airing on Prime it could of quite easily had many more Fallout-inspired printables, but I tried to keep it subtle! I hope you have found something new and please let me know if you have anything you would like me to take a look at for next week’s roundup!

This page contains affiliate links and I earn a commission if you make a purchase through one of the links, at no cost to you. As an Amazon Associate I earn from qualifying purchases.