BMW Opens Cutting-Edge 3D Printing Campus to Revolutionize Car Manufacturing
BMW has officially launched its new Additive Manufacturing Campus near Munich, marking a significant step forward in automotive innovation.
-
-
Empa and EPFL Explore the Future of Construction with Aerial Additive Manufacturing
The University of Applied Sciences Empa and the École Polytechnique Fédérale de Lausanne (EPFL) are advancing research into the use of flying robots for additive manufacturing tasks
-
University of Oklahoma and Oak Ridge National Laboratory Announce Strategic Additive Manufacturing Collaboration
The University of Oklahoma (OU) and Oak Ridge National Laboratory (ORNL) have announced a new strategic partnership to establish an advanced additive manufacturing center in Norman, Oklahoma. This new facility will focus on the development of metal additive manufacturing technologies, with a special emphasis on applications for aerospace and national defense.
-
Cryogrip Frostbite Plate Review: Best Build Plate for PLA & PETG?
Thinking about upgrading your 3D printer bed? In this hands-on review, I test the Cryogrip Frostbite and Pro Glacia build plates, plus the Panda Edge scraper. Find out why the Frostbite plate might be the best choice for hassle-free PLA and PETG prints!
-
Is It Safe to Leave a 3D Printer Unattended? (Spoiler: Sometimes… But Not Always)
3D printing is safe, but, leaving a 3D printer unattended comes with a few important risks.
-
Bambu Lab Quietly Testing Filametrics: A New Way to Track Filament and Organize Your Prints
Bambu Lab appears to be testing a new tool that could make managing 3D printing projects a whole lot easier.
-
xTool and Snapmaker: A Potential Collaboration in the Works?
Recent online discussions have sparked speculation about a possible partnership between xTool and Snapmaker, two prominent names in the multifunctional fabrication arena.
-
Bambu Lab Unveils BambuStudio 2.0: A Smarter Slicer for Dual Extrusion and Streamlined Printing
Bambu Lab has rolled out a major update to its 3D printing software with the release of BambuStudio 2.0, promising a smoother, smarter, and more intuitive experience for makers—especially those using dual extrusion setups.
-
Which Filament For 3d Printing? 10 Things I Wish I Knew Before Buying My First Spool
When I bought my first spool of 3D printing filament, I thought I was all set. I had the printer, the slicer software, and a model ready to go. I grabbed a random spool of PLA from Amazon (it was cheap and blue—what more could I want?) and hit print.
-
Top 10 Mistakes I Made as a 3D Printing Beginner (So You Don’t Have To)
In this article, I want to share the biggest blunders I encountered in my early 3D printing days, so you can skip the frustration and jump straight to successful prints. Here are the top 10 mistakes I made—and how you can avoid them.
